產品中心

服務熱線:


開封市泛太測控科技有限公司    

Kaifeng Fantai Measurement and Control Technology Co.,Ltd

地址:中國·河南省開封市祥符區經開區王解莊南路中


0371-23212206           

郵   箱:[email protected]

Oversea sales:in[email protected]meter.com

網   址:www.739706.tw



 

 

 

Separated magnetic flowmeter

時間:2020-03-09人氣:

Intelligent Compact Flow Meter magnetic flow meter

Wall mounted Compact Flow Meter magnetic flow meter introduction

 

Electromagnetic flow meters, or magmeters, are comprised of a transmitter and sensor that together to measure flow. The magnetic flow meter’s sensor is placed inline and measures an induced voltage generated by the fluid as it flows through a pipe. The transmitter takes the voltage generated by the sensor, converts the voltage into a flow measurement and transmits that flow measurement to a control system.

Intelligent wall mounted Compact Flow Meter magnetic flow meter

  • Easy Setup
  • Minimal Straight Pipe
  • Forward or Reverse flow and Total
  • IP65,IP67 ,IP68 Rated (optional)
  • 100:1 Turndown
  • Virtually No Pressure Loss
  • No Moving Parts
  • RS485 Standard,HART standard is available.
  • Suitable for Pipes Up to DN3000
  • High Accuracy to 0.2%R .
  • 4 to 20 mA and Frequency Outputs Standard
  • 3-Point Calibration Included
62

Wall mounted pulse Compact Flow Meter magnetic flow meter

Model

DN6~DN3000mm

Nominal Pressure

0.6~1.6MPa(2.5Mpa/4.0Mpa/6.4Mpa...42Mpa)

Accuracy

±0.5%,±0.3%or±0.2% are available

Liner material

Teflon,PFA,F46,Neoprene,Polyurethane

Electrode Type

General type 

Electrode material

Stainless steel SUS316,Hastelloy B, Hastelloy C,Titanium,Tantalum  Platinum-iridium,
Stainless steel covered with tungsten carbide

Mediem temperature

Integral type

-20°C~+60°C

Remote type

Neoprene & Polyurethane Liner

-10°C~+80°C

 PTFE Liner /PFA Liner /F46 Liner

-10°C~+160°C

Ambient Temperature

-25°C ~+ 60°C

Ambient Humidity

 5~100%RH(relative humidity)

Medium Electrical 
conductivity

≥5μ s/cm

Measuring Range

1500:1,flow rate<15m/s

Structure type 

Integral type,remote type,submersible type,ex-proof type

Protection Class

IP65,IP68(optional)

Ex-proof Mark

ExmdⅡT6

Product Standard

JB/T 9248-1999 Electormagnetic Flowmeter


 

Calibration is the most important parts of manufacturing the high accuracy flowmeter,As the principle is the same,the material and the structure design of the flowmeter is not much different.High accuracy flowmeters depends on the high accuracy calibration equipment.

Intelligent Compact Flow Meter magnetic flow meter in details

 

 

  • We use the reference flowmeter method to confirm the sensor condition,then after assemble,we will use the gravimetric systems to confirm the sensor and the transmitter condition.The calibration device included the high accuracy Sartorius scale.
  • We use the AB clue to fix the bolts and nuts in case it may loose because of the vibration and long distance transportation
  • The welding of the housing and the flange are operated by our senior welding engineers who have at least 5 years experience.The inner flange is welded completely to make sure no humidity enter into the flowmeter house.
  • The thickness of the linner is more than 3mm.
  • The exciting coil of wires are copper wire.
  • We use the label to remind customer where to connect the power and voltage in case the unmatched voltage damage the flowmeter.
  • The big screen LCD display the forward gross volume,flow volume and unit clearly.
  • Flowmeter use the matched grounding rings to keep high accuracy measurement stable

Related products

Electromagnetic Flowmeter Company Information

 


          電   話:0371-23212206           

郵   箱:[email protected]

彩票极速赛车计划网页 内蒙古福彩快三开奖 理财平台排名鸿坤金服 天津十一选五开奖结果一定牛天天 体彩大乐透直播 福利彩票排列7历史号码 吉林11选五开奖结果查询 西宁快三开奖查询走势图 12bet什么是百家乐揽法 江苏11选5开一定牛遗漏 江苏十一选五前三直选